Three ways to clean springs

When stainless steel springs are used for a period of time, or when the springs are just produced from the machine, oil stains will inevitably appear on the surface, and if you do not use the proper method when dealing with the oil stains, then not only will the oil stains not be removed, but the springs will be damaged. So how does the spring manufacturer remove the oil from the stainless steel springs?

1、Cleaning agent
Stainless steel springs should go into the cleaners diluted with water, the dilution ratio of water and cleaning agent is 1:1 or 1:2, the soaking time should not be too long, and no oil on the surface of the stainless steel springs should be removed after rinsing clean with water so that the stainless steel springs can restore the matte effect.

Ultrasonic cleaning equipment

2、Ultrasonic
The ratio of cleaning agent to water in the ultrasonic equipment is about 1:30, soaking time should not be too long, and no oil on the surface of the stainless steel spring should be removed after rinsing with clean water so that you can make the stainless steel spring to restore the matte effect.

 

3、Vibration finishing machine
Stainless steel springs into the vibration finishing machine with the coarse abrasive and cleaning agent, the spring grinding and polishing, take out the stainless steel springs with water to clean, the spring surface is only no scratches, but also more polished.

Spring Vibration finishing machine

Nowadays, there are very many manufacturers producing stainless steel springs, and there are many spring manufacturers who are not rigorous enough in the production of springs, which leads to problems in the quality of springs, so it is necessary to handle the springs properly at the time of production and to avoid corrosion damage to the springs in the process of use in order to keep their performance.

Scroll to Top